SPIRAL VISCOMETER（PCU-200）DISCONTINUED
●World Standard for Solder Paste Quality Control
●Spiral pump sensors and system measure materials of high thixotrophy reproducibly.
World Standard
JIS/IEC/ANSI
Usage
Rotational viscometer of co-axial double cylinder type by spiral pump method.
product specification
| Item | Specification | ||
| Model Name | PCU-201 | PCU-203 | PCU-205 |
| Sensor | Malcom Spiral Pump Type | ||
| Measurement Range Pa・s | 5Pa・s - 800Pa・s | ||
| Speed Range N | 1 - 50RPM | ||
| Shear Rate D | (0.6 x N) s-1 | ||
| Measurement Accuracy | +/-5% of indicated value | ||
| Speed Accuracy | +/-2% of set point | ||
| Repeatability | +/-0.5% | ||
| Temp. Control Range | Room temperature +/-5C (setting range15～35C) with built-in heater unit | ||
| Other Functions | Contact output, buzzer (In the case of the set viscosity value) | ||
| Recorder Output | Viscosity : 1mV/Pa・s, Temperature : 10mV/C | ||
| Printer Display | Temp, Visc, S.Rate, RPM, Date, Time | ||
| Automatic Measurement | --- | JIS Standard method | JIS plus On-line method* |
| Interface | --- | --- | RS-232C |
| Outer Dimension | 275(W)×215(D)×465(H)（mm） | ||
| Power Supply | AC100V～240V 50／60Hz 70VA | ||
- * The measurement accuracy is guaranteed with the silicon oil by 10 rpm.
- * The above specifications are subject to change without notice.
【On-Line Method】
Control, acquisition and computation of flow characteristics, thixotropic index, recovery ratio, fluid constant.
- * Recorder Output and computer communication(RS-232C) can not use at the same time.
- * PCU-201 and PCU-203 do not have computer communication(RS-232C)
